Current EV

Available to order

Cascadia Motion SS-250-115-D GEN2 SINGLE STACK

The Cascadia Motion SS-250-115-D Gen2 Single Stack is a 500 Nm (369 lb-ft) electric traction motor built on the proven BorgWarner HVH250-115 core, the same motor inside Cascadia's…

$8,200

USD. Shipping and applicable taxes are added at checkout.

Specifications

About this product.

The Cascadia Motion SS-250-115-D Gen2 Single Stack is a 500 Nm (369 lb-ft) electric traction motor built on the proven BorgWarner HVH250-115 core, the same motor inside Cascadia's iM-225. It's a motor only: you pair it with a separate inverter, which lets you mount the inverter wherever it packages best and choose the voltage your build runs on.

Output depends on your pack voltage and inverter. With a 400 V-class system and the Cascadia CM200DX inverter, it makes about 250 kW (335 hp). On a 700 V-class system with a higher-voltage Cascadia inverter, it's rated up to 375 kW (about 500 hp). Peak torque is 500 Nm at 730 A rms, it spins to 12,000 rpm, and peak efficiency is above 95%.

It's self-contained for cooling: an integral oil sump, a mechanical oil pump and an oil-to-water heat exchanger keep the motor cool from your vehicle's ordinary glycol coolant loop, so you don't need an external oil system. Auxiliary oil ports are there if you want them.

At 57 kg (125 lb) and about 286 × 336 × 282 mm, it's compact for the power. That makes it a strong fit for performance EV conversions, restomods and motorsport builds.

SS-250 or iM-225? Both use the same motor core. The iM-225 puts the motor and inverter in one unit with a factory-calibrated resolver, so it's the simplest install, but it's limited to 480 V. The SS-250 needs its own inverter and resolver setup, but gives you more layout freedom and a path to 700 V-class power.

What you'll also need: an inverter (we sell the Cascadia CM200 for 400 V-class builds), AC phase cables, DC cables, a gearbox or reduction drive, a VCU, and a coolant loop.

Specifications.

Peak torque
500 Nm / 369 lb-ft (at 730 A rms)
Peak power, 400 V-class with CM200DX
About 250 kW / 335 hp
Peak power, 700 V-class
Up to 375 kW / about 500 hp
Maximum speed
12,000 rpm
Peak efficiency
Above 95%
Motor core
BorgWarner HVH250-115, parallel wound (-D)
Weight
57 kg / 125 lb
Dimensions
About 286 × 336 × 282 mm (11.25 × 13.25 × 11.12 in), W × H × L
Rotor inertia
0.085 kg·m²
Cooling
Integral sump, mechanical oil pump and oil-to-water heat exchanger; cooled by water/glycol (about 15 L/min)
Inverter
Not included; pairs with Cascadia CM200 (400 V-class) or higher-voltage Cascadia inverters
Datasheet
Cascadia Motion SS-250-115

What is included.

  • Cascadia Motion SS-250-115-D Gen2 Single Stack motor with integral oil sump, mechanical oil pump and heat exchanger
  • Inverter, cables and gearbox are sold separately

Installation notes.

Notes from the Current EV team

Everything we sell is a part we use in our own builds. Here's what we've learned putting this one in cars.

Where we've used it: we've paired the SS-250 with a Cascadia CM200 inverter in a 1967 Alfa Romeo Spider Duetto, where we detuned the motor to keep from overstressing the original differential, and in a 1977 Chevrolet Caprice Classic.

Detuning for the drivetrain: 500 Nm is a lot for a vintage axle or differential. Because the torque limit is set in the inverter, you can cap output to protect stock parts and raise it later if you upgrade them. That's what we did on the Alfa.

Resolver and motor setup: unlike the iM-225, a separate motor and inverter need resolver alignment and motor parameters set up in the inverter before full power. Cascadia supplies the SS-250 parameters for its inverters.

Cooling: the oil side is self-contained. Run the heat exchanger in your water/glycol loop at about 15 L/min, usually in series with the inverter, and fill the motor oil before first spin.

Phase cables: keep the AC cables between the inverter and motor short, shielded and secured, and plan where the inverter goes before you cut cables.

Tell us about your build and we'll help you spec the inverter, gearbox and cables around it.

Order Cascadia Motion SS-250-115-D GEN2 SINGLE STACK.

$8,200

USD. Shipping and applicable taxes are added at checkout.

Put our team to work.

Need help with installation, integration, or a complete vehicle? We build cars, and we can help build yours.